Yamaha DSP Processors

Yamaha Analog input expansion unit; features 8 remote controllable mic/line inputs; connects via YDIF format on Cat5e or better cable; Euroblock and RJ45 connectors; 1RU, - yamaha-exi8

Now only: $1,576.00

Yamaha Analog output expansion unit; features 8 line outputs; connects via YDIF format on Cat5e or better cable; Euroblock and RJ45 connectors; 1RU, - yamaha-exo8

Now only: $1,443.00

Yamaha TCP/IP connected control panel for MRX/MTX processors; features dot matrix display with multi-lingual text; 6x programmable soft buttons for a total of 36 possible controls; POE enabled connected via Cat5e or better cable; fits 3 gang electrical box size; silver finish, - yamaha-mcp1

Now only: $594.99

Yamaha 110 x 104 Output DSP processor; 16 in/8 out; GPI; 2RU; Dante enabled, - yamaha-mrx7-d

Now only: $4,717.00

Yamaha 26 x 8 Zone Matrix; YDIF interface; 8 in/4 out; GPI; 1RU, - yamaha-mtx3

Now only: $1,919.00

Yamaha 34 x 16 Zone Matrix; YDIF and Dante digital audio network interfaces; MY Card Slot; 16 in/8 out; GPI; 2RU; Dante enabled, - yamaha-mtx5-d

Now only: $3,448.00

Yamaha DME7 Digital Signal Processor

Now only: $10,499.99

Yamaha TCP/IP connected wall-mounted control panel for DME3/DME5 processors and compatible third-party devices 1 x RJ45 network connector PoE powered rotary encoder with push black finish - MCP2B

Now only: $399.99

Yamaha TCP/IP connected wall-mounted control panel for DME3/DME5 processors and compatible third-party devices 1 x RJ45 network connector PoE powered rotary encoder with push white finish - MCP2W

Now only: $399.99

Yamaha 10-inch PoE-powered touchscreen controller for Yamaha DME5 and DME3 processors. - TCD10

Now only: $1,999.99

Yamaha Optional tabletop stand for the TCD10 touchscreen controller with portrait or landscape orientation and adjustable 35° or 65° viewing angles. Supports four installation configurations. - TS-TCD10

Now only: $249.99

Yamaha Open Architecture DSP Processor, 32x16 Matrix, 96/48kHz, 16x16 Dante, 8x4 Analog I/O + Flex I/O, USB 2x2 (Type-C), 8x4 GPIO - DME3

Now only: $2,999.99

Yamaha Open Architecture DSP Processor, 64x64 Matrix, 96/48kHz, 64x64 Dante, 8x4 Analog I/O + Flex I/O, USB 2x2 (Type-C), 16x8 GPIO - DME5

Now only: $4,499.99

Yamaha TCP/IP connected wall-mounted control panel for DME3/DME5 processors and compatible third-party devices 1 x RJ45 network connector PoE powered rotary encoder with push black finish - MCP2B

Now only: $399.99

Yamaha TCP/IP connected wall-mounted control panel for DME3/DME5 processors and compatible third-party devices 1 x RJ45 network connector PoE powered rotary encoder with push white finish - MCP2W

Now only: $399.99

Yamaha 10-inch PoE-powered touchscreen controller for Yamaha DME5 and DME3 processors. - TCD10

Now only: $1,999.99

Yamaha Optional tabletop stand for the TCD10 touchscreen controller with portrait or landscape orientation and adjustable 35° or 65° viewing angles. Supports four installation configurations. - TS-TCD10

Now only: $249.99