Projection Screen Fabrics

Choosing the correct screen fabric to complement your projector can be as important as choosing the projector itself. At Focused Technology, we offer a wide selection of different screen fabrics from the best screen manufacturers in the industry. For information on a particular screen fabric, please click on the desired fabric in the table of contents below.

Table of Contents






















































Draper Screen Fabrics

Draper has been manufacturing projection screens for over 50 years. They began with a sturdy fiberglass base matt white surface, made in the midwestern United States, and they still offer screens made with this viewing surface today. Over the years, they have grown and added many new surfaces to meet different needs. Today, Draper offers over 30 surface options, including flexible and self-supporting fabrics, and surfaces for front and rear projection, with different gain, contrast, and color options.

Draper has made a major investment in building a state of the art testing lab for viewing surfaces and other products. They have broadened their range of viewing surfaces to include a full spectrum of gain options, from 0.6 through 3.2. They now offer three distinct types of acoustically transparent materials. Their viewing surfaces have new names and useful codes to help everyone identify their qualities and characteristics at a glance. They have prepared detailed technical documents outlining the results of the many tests they perform on every viewing surface. Today Draper’s offering of viewing surfaces is one of the best in the industry.



OptiView Self-Supporting Surfaces

OptiView surfaces are all self-supporting and do not require tensioning to perform well. These surfaces are generally installed on motorized or manual roller screens with a dowel below the screen surface. Most surfaces in this group have a tearproof fiberglass textile base. OptiView surfaces are very sturdy and suitable for use in a variety of settings.



Matt White XT1000E

Matt White XT1000E
Extra Wide Viewing Cone / Typical Contrast / On-Axis Gain of 1.0

The standard to which all other screen surfaces are compared. Preferred viewing surface in educational and commercial markets. A matt white surface diffuses projected light in all directions, so the image can be seen from any angle. Offers accurate color rendition, and superior clarity due to its smooth, non-embossed surface. Requires adequate provision for the control of ambient light in the audience area. Unity gain with a panoramic 180° cone. This surface has achieved GREENGUARD GOLD Certification.



Contrast Grey XH800E (formerly High Contrast Grey)

Contrast Grey XH800E
Extra Wide Viewing Cone/High Contrast/On-Axis Gain of 0.8

Smooth black backed grey surface offers excellent resolution and enhances color contrast and black levels in the projected image. Recommended for use with moderate and high output digital projectors. Performs well in conditions of ambient light. Full 180° viewing cone. This surface has achieved GREENGUARD GOLD Certification.



Contrast White XH1100E

Contrast White XH1100E
Extra Wide Viewing Cone/High Contrast/On-Axis Gain of 1.1

Black backed white diffusion coating over a grey base material, yields a surface with the best qualities of both matt white and contrast grey screen fabrics. Recommended for use with low to moderate light output digital projectors, where some provision for light control exists. Improves the quality of blacks without affecting whites or sacrificing gain. Flame and mildew resistant.



Argent White XH1500E

Argent White XH1500E
Extra Wide Viewing Cone/High Contrast/On-Axis Gain of 1.5

Black backed matt white base material with luminous coating. Offers high reflectivity, while maintaining a broad viewing cone. Provides excellent resolution and color balance. Consider for use with moderate light output projectors in situations where ambient light cannot be adequately controlled. Flame and mildew resistant.



Pearl White CH1900E

Pearl White CH1900E
Controlled Viewing Cone/High Contrast/On-Axis Gain of 1.9

Black backed matt white surface with pearlescent surface coating. Offers excellent resolution, color balance and uniformity. Tolerates a higher ambient light level than many front projection screen surfaces. Moderate viewing cone. Flame and mildew resistant.

OptiFlex Tensioned Surfaces

The OptiFlex surfaces are suitable for tensioning and are available on permanently tensioned screens and/or tab tensioned roller-operated screens. Choose OptiFlex for the flattest viewing surfaces.



Matt White XT1000V (formerly M1300)

Matt White XT1000V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 1.0

The perfect matt white diffusing surface. Recommended for use with all types of projectors provided ambient light can be reasonably controlled. This surface is well suited for blending applications. Reflects a uniformly bright image over complete 180° viewing cone with precise resolution and accurate color balance. This surface has achieved GREENGUARD GOLD Certification. Available with black backing upon request.



Pure White XT1300V

Pure White XT1300V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 1.3

Pure White XT1300V offers a 30% boost in brightness over a traditional matt white surface while still maintaining an extremely wide viewing cone, with half gain angle over 90 degrees. No color shift at any angle, excellent white field uniformity. Available with black backing and without.



Grey XH600V (formerly HiDef Grey)

Grey XH600V
Extra Wide Viewing Cone/High Contrast/On-Axis Gain of 0.6

Grey front projection surface with black backing provides excellent contrast and black reproduction. Intended for use with moderate to high output digital projectors. Grey color enhances color contrast and black levels in the projected image. Also allows for more ambient light in the audience area than matt white surfaces. Relatively broad viewing cone. This surface has achieved GREENGUARD GOLD Certification. Available with black backing upon request.



Pearl White MH1500V (formerly M2500)

Pearl White MH1500V
Moderate Viewing Cone/High Contrast/On-Axis Gain of 1.5

Black backed matt white surface with pearlescent coating. Offers excellent resolution, color balance and uniformity. Tolerates a higher ambient light level than many front projection screen surfaces. Moderate viewing cone.



ReAct MS1000V

ReAct MS1000V
Moderate Viewing Cone/Superior Contrast/On-Axis Gain of 1.0

ReAct MS1000V is an opaque projection surface which offers enhanced color contrast even in ambient light. ReAct MS1000V is fully HD compliant and is available on both permanently tensioned and tab-tensioned screen models. It is perfect for use in multipurpose s where the lighting is hard to control and the screen needs to be out of sight when not in use.



Matt White XT1000VB

Matt White XT1000VB
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 1.0

Draper's M1300 viewing surface with a black backing for situations where ambient light behind the screen is an issue. No half-gain angle. GREENGUARD GOLD certified.



ClearSound Acoustically Transparent Surfaces

Whenever sound sources are to be located behind the viewing surface ClearSound surfaces are designed to allow sound through and still perform well optically. Standard and microscopic perforations are available, and the innovative woven acoustically transparent (AT) fabrics, first available through Draper. The combination of self-supporting and tensioned ClearSound surfaces means that almost any Draper projection screen model can be provided with a ClearSound viewing surface. Acoustically transparent surfaces are not recommended for use in screen sizes less than 80” wide.



ClearSound White Weave XT900E (formerly AT1200)

ClearSound White Weave XT900E
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.9

The most innovative and versatile acoustically transparent screen material available. Reflects uniform image over full 180° field with accurate color fidelity. The finely woven textile combines the smallest openings for improved visual performance with the largest number of openings, allowing minimum interference to the audio signal. Some control of ambient light is recommended. Flame and mildew resistant. It is recommended that viewers be 10 feet or more from the screen so that optical properties are not compromised.



ClearSound Grey Weave XH600E (formerly AT Grey)

ClearSound Grey Weave XH600E
Extra Wide Viewing Cone/High Contrast/On-Axis Gain of 0.6

Offers the acoustical properties of ClearSound White Weave XT900E, while providing the best optical qualities of both matt white and contrast grey screen fabrics. Provides vivid color contrast over a full 180° viewing cone. The finely woven textile combines the smallest openings for improved visual performance with the largest number of openings, allowing minimum interference to the audio signal. Flame and mildew resistant. It is recommended that viewers be 10 feet or more from the screen so that optical properties are not compromised.



ClearSound NanoPerf XT800V

ClearSound NanoPerf XT800V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.8

Microscopic perforations in the black backed fabric create an acoustically transparent surface that does not compromise audio quality when speakers are placed behind the screen, while providing a beautiful image. The projected image is gorgeous, with a full 180° viewing cone and accurate color reproduction. Ideal for home theatre. Openings in this type of surface are smaller and more numerous than standard perforated surfaces allowing viewing distances of 10 feet or more and improved acoustics.



ClearSound Perf XT900V

ClearSound Perf XT900V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.9

Flexible black backed matt white perforated surface. Reasonable control of ambient light is recommended. This surface is well suited for larger screens and larger s. Due to the size of openings in this surface type it is recommended that viewers be 20 feet or more from the screen so that optical properties are not compromised.



ClearSound Perf XT950E

ClearSound Perf XT950E
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.95

Textile black backed matt white perforated surface. This surface is well suited for larger screens and larger s. Due to the size of openings in this surface type it is recommended that viewers be 20 feet or more from the screen so that optical properties are not compromised.



CineFlex Rear Projection Tensioned Surfaces

Draper has offered a CineFlex flexible rear projection surface for many . CineFlex has grown into a family of surfaces, offering choices of gain* and color to meet a range of rear projection needs. CineFlex surfaces are available on a wide range of permanently tensioned, portable, and tab tensioned projection screen models. CineFlex surfaces include:



CineFlex CH1200V (formerly CineFlex)

CineFlex CH1200V
Controlled Viewing Cone/High Contrast/On-Axis Gain of 1.2

Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. Moderate viewing cone.



CineFlex MH800V (formerly Low-Gain CineFlex)

CineFlex MH800V
Moderate Viewing Cone/High Contrast/On-Axis Gain of 0.8

Low gain flexible rear material. Designed for use with high light output projectors and wide audience seating patterns. Offers rich color contrast, well-defined resolution, and a broad viewing cone.



CineFlex White XT700V

CineFlex White XT700V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.7

The CineFlex White XT700V white rear projection surface works well for edge matching or blending and short throw rear projection applications. A reasonable control of ambient light is recommended. Surface has a broad viewing cone and high resolution. Typically used as a rear projection surface, it can be used in dual or low gain front projection applications. This is a foldable viewing surface that can be used on folded, fixed, or roller-operated screens.



CineFlex White XT600V (formerly UniFlex White)

CineFlex White XT600V
Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 0.6

This white rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Broad viewing cone and high resolution. Reasonable control of ambient light is recommended.

Back to Top

Da-Lite Screen Fabrics

Surfaces formulated by Da-Lite chemists and optic technicians are some of the best surfaces for your image. Each Da-Lite surface is specifically formulated to preserve, and in some cases enhance, every pixel projected resulting in expert clarity, rich contrast, vivid color and brightness.



HD Progressive 0.6

HD Progressive 0.6
Half Angle:85° | Gain: 0.6

Ideal for high output projectors or applications where projector brightness and screen size require low gain, the gray surface compensates for a brightly lit environment so that image contrast is preserved. In Low ambient light, HD Progressive 0.6 provides deep contrast for a rich enhanced image, and is typically used with video. Seamless in any width up to 16' in height.

HD Progressive 0.6 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



HD Progressive 0.9

HD Progressive 0.9
Half Angle: 85° | Gain: 0.9

Ideal for moderate to high output projectors, the light gray surface achieves a perfect balance between color reproduction and image contrast. Seamless in any width up to 16' in height.

HD Progressive 0.9 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



HD Progressive 1.1

HD Progressive 1.1
Half Angle: 85° | Gain: 1.1

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers true color reproduction and fidelity. Seamless in any width up to 16' in height.

HD Progressive 1.1 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



HD Progressive 1.3

HD Progressive 1.3
Half Angle: 75° | Gain: 1.3

Ideal for applications where projector brightness and screen size require an increase in gain, the purest white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. It also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. Seamless in any width up to 16' in height.

HD Progressive 1.3 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



HD Progressive 1.1 Perf

HD Progressive 1.1 Perf
Half Angle: 85° | Gain: 1.1

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers true color reproduction and fidelity. The perforated vinyl surface allows for the installation of speakers behind the surface. Available in any width up to 8' in height.

HD Progressive 1.1 Perf can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Parallax 0.8

Parallax 0.8
Half Angle: 85° | Gain: 0.8

Parallax is an ambient light-rejecting technology that features a micro-layered optical lens system that rejects light. This new technology mimics the look of a television when it is on and when it is off, but without the glare from windows or lighting fixtures.

With extremely wide viewing angles, no speckle and no glare, the surface is ideal for applications in Pro AV. Additionally, the surface is flexible, ships in a roll and is easy to install.

Each layer of Parallax plays a role in preserving the image that is reflected back to the viewer in high ambient light environments. Some layers absorb light while one special layer is shaped like a microscopic saw-tooth that blocks light from above resulting in the preservation of high-contrast, bright images in brightly lit environments.

  • Horizontal Half Angle: 85º
  • Vertical Half Angle: 17º


Parallax UST 0.45

Parallax UST 0.45
Half Angle: 80° | Gain: 0.45

Parallax is an ambient light-rejecting technology that features a micro-layered optical lens system that rejects light. This new technology mimics the look of a television when it is on and when it is off, but without the glare from windows or lighting fixtures. Parallax UST 0.45 is unique because it is designed to be used with an ultra short throw projector that is mounted below the screen.

With extremely wide viewing angles, no speckle and no glare, the surface is ideal for applications in Pro AV. Additionally, the surface is flexible, ships in a roll and is easy to install.

Each layer of Parallax plays a role in preserving the image that is reflected back to the viewer in high ambient light environments. Some layers absorb light while one special layer is shaped like a microscopic saw-tooth that blocks light from above resulting in the preservation of high-contrast, bright images in brightly lit environments.

  • Horizontal Half Angle: 80º
  • Vertical Half Angle: 55°


Parallax Stratos 1.0

Parallax Stratos 1.0
Horizontal Half Angle: 30º | Vertical Half Angle: 30º | Ambient Light Rejection: 80%

Parallax® Stratos 1.0 is a Contrast Based, 80% ALR surface engineered for high value, large scale projects. This surface is available up to 16' H in a variety of products, including Da-Lite’s core lineup of electric screens and fixed frames to expand your product portfolio and installation applications. Appropriate for standard throw projection (1.0:1 or greater). Parallax Stratos 1.0 can be gently cleaned with water, and is mildew resistant.



Dual Vision

Dual Vision
Half Angle: 65° | Gain: 0.9

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of both front and rear projection. Dual Vision is ideal for video projection under controlled ambient light conditions. With an exceptionally wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Seamless in any width up to 16' in height.

Dual Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Ultra Wide Angle

Ultra Wide Angle
Half Angle: 78° | Gain: 0.65

Ultra Wide Angle is a flexible vinyl rear projection surface designed for wide viewing angles with controlled ambient light. It is ideal for installations using multiple projection edge blending or wide format screens with short focal length projection lenses. Ultra Wide Angle dramatically reduces the potential of hot spotting. Seamless in any width up to 16' in height.

Ultra Wide Angle can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



DA-100 WA

DA-100 WA
Half Angle: 52° | Gain: 1.0

A light gray diffusion coating that provides a unity gain and especially wide viewing angles. This wide angle optical coating is designed for use in applications where a short throw lens is required. Due to the increased half angles, DA-100 WA performs well with wide format screens. From the viewer's perspective, side-to-side uniformity of the screen is maximized.

DA-100 WA can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-50 WA

DA-50 WA
Half Angle: 60° | Gain: 0.5

Specifically designed for applications using high lumen projectors in conjunction with short throw lenses, this optical coating provides wider half-gain angles than traditional coatings, reducing the incidence of hot spotting. The DA-50 WA coating is unique in its ability to offer a high contrast tint to the projected image while maintaining wide viewing angles.

DA-50 WA can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-75 WA

DA-75 WA
Half Angle: 78° | Gain: 0.75

A light gray diffusion coating with a .75 gain and extremely wide viewing angles. DA-75 WA is designed for use in applications where a short throw lens is required. Due to the increased half angles, DA-75 WA performs well with wide format screens. From the viewer's perspective, side-to-side uniformity of the screen is maximized.

DA-75 WA can be cleaned with mild soap and water, is flame retardant and mildew resistant.



Da-Mat

Da Mat
Half Angle: 60° | Gain: 1.0

Da-Mat is a unity gain vinyl surface with a smoother surface than Matte White. It features a white surface for good color reproduction for environments with controllable ambient light. Seamless in any width up to 16' in height.

Da-Mat can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



High Contrast Da-Mat

High Contrast Da Mat
Half Angle: 45° | Gain: 0.8

High Contrast Da-Mat® is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. Best in environments with a high output projector and completely controlled ambient light. Seamless in any width up to 16' in height.

High Contrast Da-Mat can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Cinema Vision

Cinema Vision
Half Angle: 45° | Gain: 1.3

Cinema Vision is designed to provide a higher amount of brightness for lower output projectors. Its increased reflectivity enhances brightness in situations where a moderate level of ambient light is present. Ideal for video images. Seamless in any width up to 16' in height.

Cinema Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



High Contrast Cinema Vision

High Contrast Cinema Vision
Half Angle: 50° | Gain: 1.1

High Contrast Cinema Vision features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness for moderate ambient light. Ideal for video images. Seamless in any width up to 16' in height.

High Contrast Cinema Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Pearlescent

Pearlescent
Half Angle: 40° | Gain: 1.5

Pearlescent offers a higher amount of reflectivity than Da-Mat, and is designed for use in applications where moderate viewing angles are required. This surface is a good choice when producing video images with a lower output projector or where there is a high amount of ambient light present. Seamless in any width up to 16' in height.

Pearlescent can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



3D Virtual Gray

3D Virtual Gray
Half Angle: 11° | Gain: 1.85

3D Virtual Gray is designed for passive 3D front projection. 3D Virtual Gray is a vinyl projection surface that retains 99% of polarized light. Other characteristics include the ability to maintain high extinction values, eliminate ghosting or crosstalk and excellent contrast. 3D Virtual Gray is ideal for low ambient light. Available in any width up to 16' in height.

3D Virtual Gray can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Audio Vision

Audio Vision
Half Angle: 60° | Gain: 1.0

Audio Vision is a unity gain, perforated vinyl surface that allows for the installation of speakers behind the surface, and offers good color reproduction in environments with controllable ambient light. Available in any width up to 8' in height.

Audio Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



DA-100

DA-100
Half Angle: 35° | Gain: 1.0

A neutral gray diffusion coating that provides contrast enhancement while maintaining uniformity and color rendition. Its versatility makes it a good choice for situations with good control over ambient light and where a wide viewing angle is necessary. It is also well suited for high resolution applications.

DA-100 can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-130

DA-130
Half Angle: 34° | Gain: 1.3

A neutral gray diffusion coating designed to provide a moderate amount of brightness for applications where ambient light is controllable and moderately wide viewing angles are required.

DA-130 can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-150

DA-150
Half Angle: 32° | Gain: 1.5

A neutral gray diffusion coating designed to provide a higher amount of brightness and contrast for situations where a low level of ambient light is present or where a projector with moderate output is utilized.

DA-150 can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-180

DA-180
Half Angle: 30° | Gain: 1.8

A neutral gray coating offering a higher on-axis gain for situations where a moderate output projector is utilized and where there is a high amount of ambient light present. This coating is well suited for applications where viewing angles are not wide and a higher gain coating is needed for on-axis viewing.

DA-180 can be cleaned with mild soap and water, is flame retardant and mildew resistant.



DA-230

DA-230
Half Angle: 25° | Gain: 2.3

A neutral gray coating with high gain and a moderate viewing angle. The increased gain of this surface makes it suitable for environments where ambient light is uncontrollable and a projector with moderate light output is utilized. Good for situations where the audience is centered within a 50-degree cone from the center of the screen.

DA-230 can be cleaned with mild soap and water, is flame retardant and mildew resistant.



Video Vision

Video Vision
Half Angle: 55° | Gain: 1.0

A special coating process generates a screen ideal for video projection under controlled light conditions. This material offers an exceptionally wide field of view so each audience member will observe a uniform, bright, sharp image with no color shift. This screen material is a good choice when producing video images with a projector that has good black levels.

Video Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.



High Contrast Audio Vision

High Contrast Audio Vision
Half Angle: 45° | Gain: 0.8

High Contrast Audio Vision is a perforated vinyl surface that allows for the installation of speakers behind the surface. Designed for high-output projectors, it features a dark gray base for deeper reproductions of black, which improves the perception of contrast. This surface is best in environments with controllable ambient light. Available in any width up to 8' in height.

High Contrast Audio Vision can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Da-Tex

Da Tex
Half Angle: 30° | Gain: 1.3

Da-Tex is a vinyl, gray, rear projection surface that works well in high ambient light with a reduced viewing angle. It offers high transmission and low reflective values for optimal viewing. It yields excellent color rendition and image contrast. Seamless in any width up to 16' in height.

Da-Tex can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



High Contrast Cinema Perf
High Contrast Cinema Perf
Half Angle: 50° | Gain: 1.1

High Contrast Cinema Perf is a perforated vinyl surface that allows for the installation of speakers behind the surface. It features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness where a moderate level of ambient light is present. Ideal for video images. Available in any width up to 8' in height.

High Contrast Cinema Perf can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Matte White
Matte White
Half Angle: 60° | Gain: 1.0

Matte White is a fiberglass surface for non high-definition projection and environments with controllable ambient light that preserves color as well as black and white images. Seamless sizes vary by product. Contact a Sales Partner for more information or consult the Specification Sheet.

Matte White can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Perforated Matte White

Perforated Matte White
Half Angle: 60° | Gain: 1.0

Perforated Matte White is a surface for non high-definition projection and environments with controllable ambient light that preserves color as well as black and white images. The perforated surface allows for the installation of speakers behind the surface.

Perforated Matte White can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



High Contrast Da-Tex

High Contrast Da Tex
Half Angle: 40° | Gain: 1.0

High Contrast Da-Tex® is a vinyl, dark gray, rear projection surface that works well in high ambient light with a moderate viewing angle. The dark gray surface allows for deeper reproductions of black, which improves contrast. Seamless in any width up to 16' in height.

High Contrast Da-Tex can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



3D Virtual Black

3D Virtual Black
Half Angle: 10° | Gain: 1.3

3D Virtual Black is designed for passive 3D projection. 3D Virtual Black is a vinyl, rear projection surface that retains 99% of polarized light. Other characteristics include the ability to maintain high extinction values, eliminate ghosting or crosstalk and excellent contrast. 3D Virtual Black provides exceptional image contrast and vivid images even in ambient light. Seamless in any width up to 16' in height.

3D Virtual Black can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



High Contrast Matte White

High Contrast Matte White
Half Angle: 50° | Gain: 1.1

High Contrast Matte White is a fiberglass surface with a gray base for deeper reproductions of black, which improves contrast. It is for non high-definition projection and environments with moderate ambient light. Available in any width up to 10' in height.

High Contrast Matte White can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Video Spectra 1.5

Video Spectra 1.5
Half Angle: 35° | Gain: 1.5

Video Spectra 1.5 is a fiberglass surface with a reflective coating for lower output non high-definition projectors. It offers increased brightness with a reduced viewing angle. Suitable for uncontrolled ambient light. Available in any width up to 8' in height.

Video Spectra 1.5 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.



Silver Lite 2.5

Silver Lite 2.5
Half Angle: 25° | Gain: 2.5

Silver Lite 2.5 is a fiberglass multi-purpose front projection surface for non high-definition projection that is optimized for passive linear and circular 3D applications, and is also compatible with 2D projection. The silver surface maintains 99.3% of polarized light. Silver Lite 2.5 eliminates ghosting or crosstalk common with stereoscopic 3D projection. When paired with 2D projection, the gain and high contrast create a perfect surface for high ambient light environments or a low output projector. Available in any width up to 8' in height.

Silver Lite 2.5 can be cleaned with mild soap and water, is flame retardant and mildew resistant.

This surface has achieved GREENGUARD GOLD Certification.

Back to Top

Elite Screens Screen Fabrics

Elite Screens offers a wide selection of projection screen fabrics to suit a variety of projection environments. Most fabrics are washable with mild soap and water. Regardless of your projection environment, Elite Screens offers a screen fabric for your projection solution!



AcousticPro UHD

AcousticPro UHD
Acoustically Transparent Moiré-free Front Screen Material
Gain: 1.0 | Viewing Angle: 180° (90°L/R)

The AcousticPro UHD (ultra-high definition) is a moiré-free self-supported acoustically transparent front projection screen material. The dense synthetic weave is compatible with Ultra-High Definition/4K resolutions while mitigating light penetration for a brighter picture. The AcousticPro UHD design maximizes sound penetration with minimal attenuation without compromising picture quality. The AcousticPro UHD material’s wide diffusion uniformity offers a broad viewing angle with superb picture quality across the entire surface. This provides equal brightness levels on or off axis.



CineWhite

CineWhite
Tensioned PVC Front Projection Material
Gain: 1.1 | View Angle: 160° (80° ±LR)

CineWhite (Tension Matte White) has broad light dispersion through diffusion uniformity, black & white contrast and true color rendition making it the most versatile in Elite's tensions screen product lines. This tensioned PVC surface is the best choice for today's high-contrast ratio projectors in commercial or residential presentations. The CineWhite material equals the performance to Elite Screen's MaxWhite product, but improves the experience with the superior surface flatness. Uniform diffusion surface has black-backing to eliminate light penetration and is easily washable with mild soap and water.



AcousticPro 1080P3

AcousticPro 1080P3
Acoustically Transparent Angular Weaved Front Screen Material
Gain: 1.0

The AcousticPro1080P3 is an acoustically transparent front projection material. The angular weave eliminates the moire effect while presenting warm neutral colors for today's high definition 1080P (1920x1080) projectors. The AcousticPro1080P3 allows speaker placement behind while allowing an exceptional acoustically transparent performance.



CineGrey

CineGrey
Tensioned PVC Front Projection Contrast Material
Gain: 1.0 | View Angle: 160° (80° ±LR)

CineGrey (Tension High Contrast Grey) is designed for low contrast DLP and LCD Home Cinema Projectors. Its superior flatness makes the CineGrey ideal for home theater use. It enhances black levels while minimizing loss in color reproduction. Uniform diffusion surface has black-backing to eliminate light penetration and is easily washable with mild soap and water.

*Manufacturer's Tip: if your projector's contrast ratio is more than 2000:1, we recommend you use CineWhite material for a brighter picture.



CineGrey 5D

CineGrey 5D
2D/3D Polarized Ambient Light Rejecting Screen Material
Gain: 1.5 | View Angle: 80º (±LR 40º)

The CineGrey 5D is an angular reflective front projection material designed to reject ambient light while maintaining superb picture quality. The CineGrey 5D is the perfect solution for rooms that have little or no control over incidental light. This means that it's an ideal fit for family rooms as well as lecture halls, boardrooms, sports bars, training facilities, and other business environments. In addition, the CineGrey 5D increases projector brightness 1.5 times. This is perfect for low lumens ouput projectors!

The CineGrey 5D is superior to traditional white or gray materials in its ability to maintain a sharp, bright image regardless of ambient light. The angular reflective material incorporates a diffusion layer over a highl reflective surface. This causes direct light from the projector to reflect squarely into the viewer's field of vision while the outer contrast layer enhances image quality while absorbing indirect ambient light.



Max White

MaxWhite
MaxWhite Front Projection Material
Gain: 1.1 | View Angle: 180° (90° ± LR)

MaxWhite screen material is the most versatile screen surface for front projection presentations. This material provides the widest possible viewer angles with perfect diffusion uniformity while giving precise definition, image color reproduction and black & white contrast. Screen surface has black-backing to avoid light penetration and can be cleaned safely with mild soap and water. Woven screen material is a multi-layer, cross-array coated with a matte white reflective compound.



Max White B

MaxWhite B
MaxWhite B Front Projection Material
Gain: 1.0 | View Angle: 180° (90° ± LR)

Elite’s MaxWhite B material is a matte white material formulated to meet our conventional screens that delivers optimal picture quality. Its neutral 1.0 gain allows for the widest possible viewing angles of 180° (90° Left and Right). The matte surface of the MaxWhite B offers superb diffusion uniformity while delivering radiant image and color reproduction. The screen surface has black-backing to avoid light penetration and can be cleaned safely with mild soap and water.



MaxWhite Fiberglass

MaxWthiteFG
Fiber-Glass backed Woven Front Screen Material
Gain: 1.1 | View Angle: 180° (90° ± LR)

MaxWhite Fiberglass (FG) is fiberglass backed for added stiffness which provides the flattest possible non-tensioned screen surface with universal applications. This material provides wide viewing uniform diffusion while giving precise definition, color reproduction and black & white contrast. The screen surface has a black-backing to eliminate light penetration, is mildew resistant and washable with mild soap and water.

* Manufacturer tip: This is an enhanced matte white product for higher end DLP/LCD projectors suitable for commercial and residential presentations.



VersaWhite

VersaWhite
Multi-layer Matte White Front Projection Screen Material with dry erase surface
Gain: 1.1 | View Angle: 180° (90° ±LR)

VersaWhite Material performs as versatile as a Matte White screen material with the addition of being a dry-erase surface as well. The surface is coated with a scratch-resistant nanotech resin and transparent dry-erase layer for use as a white board while keeping uniform diffusion and enhancing true color rendition.



WraithVeil

WraithVeil
Tensioned PVC Rear Projection Material
Gain 2.2 | Viewing angle: 160° (80° ± LR)

WraithVeil is our rear projection screen material. It has a high gain performance for applications with a high ambient light intrusion. Its 2.2 gain configuration is ideal for events such as clubs, restaurants, trade shows, meeting rooms, and outside evening presentations. Its special surface coating enhances color reproduction and black level contrast with wide uniformity for large audiences. Seamless screen sizes are available in sizes up to 200".



WraithVeil 2

WraithVeil 2
Tensioned PVC Rear Projection Material
Gain 2.2 | Viewing angle: 160° (80° ± LR)

WraithVeil is our rear projection screen material. It has a high gain performance for applications with a high ambient light intrusion. Its 2.2 gain configuration is ideal for events such as clubs, restaurants, trade shows, meeting rooms, and outside evening presentations. Its special surface coating enhances color reproduction and black level contrast with wide uniformity for large audiences. Seamless screen sizes are available in sizes up to 200".



PowerGain

PowerGain
Tensioned PVC Front Projection Ambient-Light-Rejecting Material
Gain: 1.8 | View Angle: 120° (60° ±LR)

The PowerGain is perfect for environments where total ambient light control cannot be attained. This is an angular reflective material that provides crisp color reproduction, black & white contrast and resists hot spotting in the presence of ambient light. The textured pearlescent material has black-backing to avoid light penetration and can be safely cleaned with mild soap and water.

*Manufactuerer's tip: Use a high resolution-low output DLP projector for the best results with this material.



AirBright 3D2

AirBright 3D2
Tensioned 3D Polarized Silver Screen Material
Gain: 2.0 | View Angle: 120° (60° ±LR)

Elite’s AirBright 3D2 is a Polarized 3D silver front projection screen material. It is designed to preserve polarization for passive 3D Dual Projector Systems.

It provides superb brightness and contrast for either a regular 2-dimensional or full-immerision 3D imaging. The material supports 2.0 gain reflectivity with strong black levels and a wide 120° viewing angle. These features make the AirBright 3D2 ideal for professional grade passive 3D applications in either a commercial or residential environment.



AcousticPro 1080P2

AcousticPro 1080P2
Acoustically Transparent Angular Weaved Front Projection Material
Gain: 1.0 | View Angle: 160° (80° ±LR)

The AcousticPro1080P2 has a matte white surface with a 1.0 gain that provides excellent color neutrality for superb color reproduction along with wide diffusion uniformity. The angular weave material is designed to allow wall-speaker sound to breathe through the screen while eliminating the visual artifact known as moiré effect. The precision angled mesh of the material allows viewers to enjoy a visually superior presentation with strong color neutrality and artifact-free performance. The material is perfect for use with native 1080p projectors for home cinema and commercial applications.



CineGrey3D

CineGrey 3D
2D/3D Polarized Ambient Light Rejecting Screen Material
Gain: 1.2 | View Angle: 90° (45° ±LR)

The CineGrey 3D is a reference quality front projection screen material formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity, and improve contrast levels. The CineGrey 3D is best for family rooms, educational facilities, conference rooms or any applications in which incident light is a factor. Typical matte white surfaces wash out the images when ambient light cannot be controlled. The CineGrey 3D is a good choice for having a projected image with a balanced color temperature and contrast under such conditions.

It provides flat spectral response for an accurate color balance in dark room environments as well for reference quality applications. The CineGrey 3D is ready for the next-generation of high-performance video.



DynaWhite

DynaWhite
Outdoor Projection Screen Material
Gain: 1.1 | View Angle: 160° (80° ±LR)

Elite’s new DynaWhite Outdoor Movie Screen is a professionally engineered yet cost-effective solution that eliminates all of the problems encountered when trying to project on regular sheet fabrics. It is made of a theater-grade PVC material that is easily fastened into place by use of its corner grommets. They evenly spread out the material tension for a flat projection surface and attach to their surrounding environment such as garage door frames, walls, trees and pole supports. Its 1.1 gain matte white projection surface is textured to avoid hot-spotting while providing color neutrality, and a wide viewing angle that is perfect for social events. Each screen is professionally matted to enhance visual contrast and to absorb the over scan or “bleed” of the projected image. All these features plus its DynaWhite simplicity that allows the average person use it makes the DynaWhite Outdoor Movie Screen a treasured asset for many seasonal events to come.



Spectra White Fiberglass

SpectraWhite Fiberglass
Fiberglass Backed Woven Front Projection Material
Gain: 1.1 | View Angle: 180° (90° ±LR)

Elite’s new Spectra White Fiberglass is a self-supporting matte white front projection screen surface with fiberglass backing. The fiberglass backing reduces the amount of curling on the edges that common non-tensioned materials are susceptible to. This feature helps maintain flatness throughout the entire material.

The Spectra White Fiberglass produces outstanding images that are rich in color and contrast in environments with controlled lighting. Offers a broad viewing angle with wide diffusion uniformity for a clear bright image from any angle. The screen surface has a black–backing to eliminate light penetration, is mildew resistant, and washable with mild soap & water.



StarBright 4

StarBright 4
Angular Reflective Front Projection Material and White Board
Gain: 4.0 | View Angle: 120° (60° ±LR)

The StarBright 4 material has a unique optical coating that enhances picture clarity regardless of an ambient light presence. The Angular-Reflective surface is coated with a transparency dry-erase layer for use as a white board while enhancing true color rendition from its highly reflective qualities. StarBright™ 4 material will enhance image brightness 4x more than the standard matte-white material and is your best dual function for White Board and Front Projection for use in training rooms with ambient light.



StarBright CLR

StarBright CLR
Ceiling Light Rejecting Front Projection Material
180° Viewing Angle

StarBright CLR is a ceiling light-rejecting front projection material designed specifically for tabletop-mounted ultra-short-throw projectors. The StarBright CLR features a multi-layer optical lens structure that absorbs off-axis light from above while providing a clear image. This allows the picture to be free from washing out the projected image.



CineWhite UHD

StarBright CLR
Tensioned matte white front projection material
180° Viewing Angle

CineWhite® UHD (Tension Matte White) is a reference-grade 1.15 gain projector screen material that is certified by the world renowned Imaging Science Foundation for its superb color temperature, contrast and black level performance. It has wide diffusion uniformity that allows equal brightness levels over a 180° viewing angle.



DynaBrite

DynaBrite
Outdoor, Mildew Resistant Fabric
180° Viewing Angle

The DynaBrite is an outdoor screen material that is durable 24/7, rain or shine. It is made for the rigors of outdoor use while maintaining color clarity with a wide viewing angle.



WraithVeil Dual

WraithVeil Dual
2-Directional Front/Rear Projection
150° Viewing Angle

The WraithVeil Dual is a 2-directional flexible vinyl projection screen material. It is designed to accommodate either front or rear projection. This versatile material eliminates the need to swap out the projection material to accommodate a front or rear projector array. It offers a 150° wide viewing angle and color balance for a variety of presentations.



Back to Top

Stewart FilmScreen Screen Fabrics



Studio Tek 100

Studio Tek 100
Gain: 1.0 | Max size: 40' x 90'

Our most requested residential fabric, StudioTek 100 is a flexible, front projection, matte white screen material formulated to meet the strictest color and white field uniformity standards. This unity gain, reference material is an optimal diffuser and disperses light in a near perfect, hemispherical distribution so that image brightness is virtually unchanged when viewed from any angle. The extremely wide viewing cone necessitates careful management of the reflected light in the viewing environment. StudioTek 100 is a great choice when ambient light can be controlled. Exclusively made by Stewart to deliver enhanced focusing capabilities for detailed on screen content.



StudioTek 130 G4

Studio Tek 130 G4
Gain: 1.3 | Max size: 8'6" x 120'

Recently reformulated StudioTek 130 G4, is a flexible, front projection screen material that now has less sparkle and offers amazing high dynamic range (HDR) of luminosity. This screen material also provides optimized white field uniformity — unmatched by competing gain screens. StudioTek 130 G4 is thirty percent brighter than a matte white screen surface. Featuring a fourth generation, proprietary optical coating, this screen material allows for crisp, sharp focusing of content as well as superb color and outstanding, white field uniformity. Certified by THX, StudioTek 130 G4 is the reference standard projection material within the AV industry.



FireHawk G5

FireHawk G5
Gain: 1.1 | Max size: 8'6" x 120'

Fifth generation FireHawk is a flexible, front projection screen surface engineered for use with today’s high-powered projection technology for applications involving the presence of ambient light. As always, ambient light is the enemy of two-piece projection. Stewart Filmscreen is in the business of image fidelity and FireHawk G5 is designed to provide the best possible trade-off between image fidelity and ambient light resistance. With increased image contrast and even better, off-axis viewing, FireHawk G5 delivers image exactness along with superior high contrast levels that have long been synonymous with Stewart Filmscreen. This is truly a great screen fabric.



GrayMatte 70

GrayMatte 70
Gain: 0.7 | Max size: 40' x 90'

A lower gain, flexible, front projection screen material formulated for use in edge blending applications. This fabric also performs well with ultra short throw projectors. GrayMatte 70 is a neutral density, gray screen surface that can also dampen cross reflection in deeply curved or circular projection installations. This fabric is an excellent vehicle for neutral attenuation of overly lit displays employing large, high resolution projectors with small projected surface areas. GrayMatte 70 offers an extremely wide viewing cone and is a frequent choice when ambient light is not completely controlled. Custom gains are available.



Back to Top