Nigel Remote Control Wall Plate Amplifier Combination - NB-80050

Nigel Remote Control Wall Plate Amplifier Combination - NB-80050

BASED ON OUR 5000 SERIES AMPLIFIERS

With our Built in Automatic On / Off Feature, the Amplifiers can be safely installed in any unattended situations, where day to day access is impossible making them perfect for "above the Ceiling" Installations using our Plenum Equipment Boxes, or when putting the Amplifiers in a wall space.

EXTREMELY LOW OPERATING TEMPERATURE

Designed to run at up to 140 Degrees, the user will have no problem running these in most Installations. Their Built in Automatic Fans ensure the Amplifier’s temperature will remain at approximately 85-90 Degrees Fahrenheit.

• *50 or 90 Watts 4 Ohm Mono or Stereo
• *25 or 45 Watts per Channel Stereo
• *or 50/90 Watts Bridged Mono
• Bridged, Balanced or Unbalanced Inputs (Preset during Installation)
• Optimized to drive Multiple Speakers
• * 75/100 Watts Peak Music Power
• Frequency Response: 15 Hz - 22 kHz
• Signal to Noise Ratio: - 65 dB
• Total Harmonic Distortion: .003 dB
• Dynamic Range: 115 dB
• Overload Protection cuts in at 140
• degrees: Automatic Reset Built In

*Depends on the Model Selected

RECOMMENDED POWER SUPPLY

• Universal 100 V -240 V Auto Sensing
• 24 V DC *3.3 or 6.3 Amps Output
• Power Supply UL / CSA Listed

*Depends on the Model Selected

DIMENSIONS
4.3" w, 4.5" d, 1.7" H
Weight: 12 ozs