Blizzard Lighting Blok 2 IP

2x 25W 5-in-1 RGBW+UV COB LEDs, IP65

The ideal size and shape to blend into any environment, this IP65 rated gem is loaded with quality components and top-notch features. Blok 2™ IP fixtures come fitted with 2x high output 25W RGBW+UV 5-in-1 COB LEDs with a 30° beam angle, plus, it goes anywhere light is needed thanks to its internal Intelion™ lithium-ion battery system. Use them freestanding almost anywhere wirelessly and without power cords as an uplight, or, mount it via its secure dual mounting brackets!

Blok 2™ IP fixtures come with a built-in wireless AnyFi™ receiver that supports W-DMX™ and our own Skywire™ 2.4Ghz wireless DMX protocol, so it can receive wireless DMX from any Blizzard transmitter such as our wiCICLE™ and Lightcaster™ products. The fixture has no fans due to its solidly constructed cast aluminum housing with heat sink that naturally dissipates any heat. It also has a tempered glass lens and watertight internal gaskets, which protect the light source, antenna, status LEDs, and the easy-to-use Micro OLED control panel with 4 touch sensitive electronic buttons.

• IP65 rated with 2x 25W RGBW+UV 5-in-1 COB LEDs
• Built-in 2.4Ghz AnyFi™ wireless DMX receiver
• W-DMX™ & Skywire™ compatible
• Intelion™ lithium-ion battery system
• 3 battery power saving modes
• User-selectable 32-bit dimming curves
• Variable electronic dimming & strobe
• Built-in automated and customizable programs
• 30 degree beam angle
• Virtual color wheel effect
• RGBW+UV color mixing ability in standalone mode
• Freestanding uplight or mountable via dual mounting brackets
• Standalone, master/slave, auto mode
• 5/6/8/11-channel DMX modes
• IR remote control (sold separately)
• Rugged and well-built
• Super-quiet with natural convection cooling
• Dual mounting brackets for positioning flexibility
• Flicker-free constant-current 1500HZ LED driver
• 3-pin XLR male input + 3-pin DMX In/Out splitter cable
• powerCON® compatible AC power input connector

• Light source: 2x 25W RGBW+UV 5-in-1 COB LED
• Beam Angle: 30°

• W-DMX™ Receiver (Frequency Hopping Protocol)
• Skywire™ 6/7-channel Receiver Mode
• Less Than 5ms Latency
• Receiver sensitivity: -94dBm

• Width: 13.2 inches (335 mm)
• Depth: 4.3 inches (108 mm)
• Height: 7.8 inches (197 mm)
• Weight: 12.1 lbs (5.5 kg)

• Protocol: USITT DMX-512
• DMX Channels: 5/6/8/11-channel DMX
• Input: 3-pin XLR male input + 3-pin DMX In/Out splitter cable
• Operating Modes: Standalone, Master/Slave, Color Preset

• Operating Voltage: 100V-264VAC, 47-63HZ
• Power Consumption: 41W, .6A, PF: .6

• 2-year limited warranty, does not cover malfunction caused by damage to LEDs