Blizzard Lighting Blok 1 IP

1x 25W 5-in-1 RGBAW COB LED, IP65

Small in size but huge in ability, this bright little IP65 rated gem is loaded with quality components and top-notch features. Blok 1™ IP fixtures come fitted with a single high-output 25W RGBAW 5-in-1 COB LED with a 30° beam angle, plus, it goes anywhere light is needed thanks to its internal Intelion™ lithium-ion battery system. The battery can easily last 10+ hours per charge with normal use, or even 2.5 hours at full light output.

Blok 1™ IP fixtures come with a built-in wireless AnyFi™ receiver that supports W-DMX™ and our own Skywire™ 2.4Ghz wireless DMX protocol, so it can receive wireless DMX from any Blizzard transmitter such as our wiCICLE™ and Lightcater™ products. The fixture has no fans due to its solidly constructed cast aluminum housing with heat sink that naturally dissipates any heat. It also has a tempered glass lens and watertight internal gaskets, which protect the light source, antenna, status LEDs, and the easy-to-use Micro OLED control panel with 4 touch sensitive electronic buttons.

• Color mixing via 1x 25W RGBAW 5-in-1 COB LED
• Built-in 2.4Ghz AnyFi™ wireless DMX receiver
• W-DMX™ & Skywire™ compatible
• Intelion™ lithium-ion battery system (Duration (full on): 2.5 hrs, Charge Time: 5 hrs)
• 3 battery power saving modes
• User-selectable 32-bit dimming curves
• Variable electronic dimming & strobe
• Built-in automated and customizable programs
• Virtual color wheel effect
• RGBAW color mixing ability in standalone mode
• Freestanding uplight or mountable via dual mounting brackets
• Standalone, master/slave, sound active modes
• 5/6/8/11-channel DMX modes
• IR remote control (sold separately)
• Rugged and well-built
• Super-quiet with natural convection cooling
• Dual mounting brackets for positioning flexibility
• Flicker-free constant-current 1500HZ LED driver
• powerCON® compatible AC power input connector

• Light source: 1x 25W RGBAW 5-in-1 COB LED
• Beam Angle: 30°
• Luminous Intensity: 1,601 Lux @ 1M, 434 Lux @ 2M

• AnyFi™ Wireless Receiver
• W-DMX™ Receiver (Frequency Hopping Protocol)
• Skywire™ 6/7-channel Receiver Mode
• Less Than 5ms Latency
• Receiver sensitivity: -94dBm

• Width: 9.5 inches (240 mm)
• Depth: 4.8 inches (122 mm)
• Height: 7.3 inches (185 mm)
• Weight: 5.5 lbs (2.5 kg)

• Duration (full on): 2.5 hrs.
• Charge Time: 5 hrs.

• Protocol: USITT DMX-512
• DMX Channels: 5/6/8/11-channel DMX
• Operating Modes: Standalone, Master/Slave, Color Preset

• Operating Voltage: 100V-264VAC, 47-63HZ
• Power Consumption: 28W, .2A, PF: .5

• 2-year limited warranty, does not cover malfunction caused by damage to LEDs