SurgeX SX-20NE-RT 20 Amp NEMA Box, with Remote On

SurgeX SX-20NE-RT 20 Amp NEMA Box, with Remote On

Part Number: SX-20NE-RT
Our Price: $599.00
Availability: Usually ships the same business day
-
+
Free Shipping
This item qualifies for FREE GROUND SHIPPING! Contiguous U.S. only.

Description

SurgeX SX20NERT SURGE ELIMINATOR & POWER CONDITIONER
With Advanced Series Mode« Surge Protection
Impedance Tolerant« EMI/RFI Filtering
SurgeX ICE« Inrush Current Elimination

The unit can be controlled with an applied voltage (5-30 vdc) or a contact closure switch connected to the Phoenix connector terminal block. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX20 NE/RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable, 12" x 12" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering as well as SurgeX ICE -Inrush Current Elimination for a comprehensive power conditioning solution.

SurgeX Advanced Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.

The SurgeX SX20 NE/RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.

FEATURES
  • Magnetic shielding steel enclosure
  • Advanced Series Mode surge protection
  • Advanced Impedance Tolerant EMI/RFI filtering
  • SurgeX ICE inrush current elimination technology
  • Remote turn-on
  • Self-test circuit with visual indicator
  • 10-year warranty
  • Made in U.S.A.

    TECHNICAL DESCRIPTION
    The SX20 NE/RT shall be housed in a magnetic shielding NEMA steel enclosure. It shall operate from 120 volts AC and have a barrier strip accessible through knck-outs in the enclosure for hardwiring power input and output connections. Overall dimensions shall be 12.0" H x 12.0" W x 4.0" D. Weight shall be 12.0 pounds.

    The unit shall have remote turn-on capabilities enabled by a hardwired connection to a separate terminal block within the enclosure. Remote turn-on and turn-off shall be activated by either a contact closure or applied DC voltage. There shall be an output voltage source for connection to a remote LED status indicator and a relay output for control and cascading.

    The SX20 NE/RT shall have a load rating of 20 amps at 120 volts, a self-test circuit with visual indicator and provide EMI/RFI filtering. It shall meet Federal Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts.
  • Specifications

    Reviews

    Downloads

    SPECIFICATIONS

    Load Rating: 20 amps @ 120 volts

    Power Requirement (no load): 15 watts

    Surge Let-Through Voltage (6000-volt surge): 0 volts

    UL 1449 Adjunct Classification Test Results:
    1000 surges, 6000 volts, 3000 amps, B3 pulse;
    Measured suppressed voltage: 170 volts; no failures.

    Federal Guidelines: Grade A, Class 1, Mode 1
    (CID A-A-55818).

    EMI/RFI Filter, Normal Mode (50-ohm load):
    40 dB @ 100 kHz; 50 dB @ 300 kHz;
    50 dB @ 3 MHz; 50 dB @ 30 MHz

    EMI/RFI Filter, Common Mode (50-ohm load):
    18 dB @ 300 kHz; 30 dB @ 1 MHz;
    50 dB @ 5 MHz; 50 dB @ 20 MHz

    Maximum Applied Surge Voltage: 6000 volts.*

    Maximum Applied Surge Current:
    Unlimited, due to current limiting.*

    Maximum Applied Surge Energy:
    Unlimited, due to current limiting.*

    Endurance (C62.41-1991 Category B3 pulses):
    1 kV>500,000; 3 kV>10,000; 6 kV>1000

    Maximum Load Inrush Current During Power-up: 1000 Joules

    Remote Turn-on Applied Voltage Range: 5 to 30 volts DC

    Remote Turn-on Current Draw:
    Contact Closure: 3 mA
    5 V DC Applied Voltage: 1 mA
    12 V DC Applied Voltage: 2.5 mA
    24 V DC Applied Voltage: 5 mA

    Auxiliary Relay Contact Rating: 30 Volts at 1 Amp

    LED Output: 12 volts DC, maximum 20 mA (resistor required)

    Dimensions: 12.0" H x 12.0" W x 4.0" D (30.5 x 30.5 x 10.2 cm)

    Weight: 12 lbs (5.45 kg)

    Temperature Range: 5║ to 35║ C

    Humidity Range: 5% to 95% R.H., non-condensing

    Agency Listings: ETL and cETL (UL 1449, 2nd edition;
    CSA C22.2 No.8-M1986, R2000)

    *1.2 x 50 Ás pulse, industry standard combination wave surge, as per IEEE C62.41

    Specifications subject to change without notice. SurgeX is a division of Electronic Systems Protection, Inc.