SurgeX SA-82-AR IP Enabled, 3 Outlet, 8A, includes brackets
This item qualifies for FREE GROUND SHIPPING! Contiguous U.S. only.
Specifically Designed to Protect Flat Panel Displays
The SA-82-AR provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 8-amp load-capable and have 2 industrial grade grounded AC receptacles.
The SA-82-AR utilizes our patented Series Mode® surge protection technology, Impedance Tolerant® EMI/RFI filtering and Over-Voltage-Shutdown which automatically restores power when line voltage returns to a safe level. The unit’s compact design can be easily integrated with today’s Flat Panel monitor mounting systems. The FlatPak™ SA-82-AR comes with a detachable IEC power cord and universal mounting brackets.
SurgeX Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. The SA-82-AR provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.
The SA-82-AR shall be a compact mountable unit in a magnetic shielding steel enclosure. It shall operate from 120 volts AC and include a separate 3-foot, grounded, 3-wire #18 line cord. There shall be 2 grounded AC receptacles. Overall dimensions shall be 1.75" H x 5.31" W x 9.06" D. Weight shall be 3.4 pounds.
The SA-82-AR shall have a load rating of 8 amps @ 120 volts. It shall be listed to UL 1449-2 and certified to Federal Grade A, Class 1, Mode 1 Guidelines for powerline surge suppressors. The unit shall provide auto-resetting overvoltage shutdown. There shall be three limiter circuits: a series surge reactor current limiter, a cascaded auto-tracking dual-polarity voltage limiter, and a pulse inverter. The onset clamping voltage shall be 172 volts nominal, and the unit shall have an instant-reacting snubber to protect against fast-rising surges generated within the installation location. The surge suppressor shall have an unlimited Applied Surge Current rating (8 x 20 µs) and shall withstand at least 1000 occurrences of Surge Pulse Voltages up to 6000 volts.
Load Rating: 8 amps @ 120 volts
Power Requirement (no load):10 watts
UL 1449-2 Adjunct Classification Test Results
1000 surges, 6000 volts, 3000 amps,
C1 pulse, measured suppressed voltage 290 volts, no failures
Grade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load):
40 dB @ 100 kHz; 50 dB @ 300 kHz;
50 dB @ 3 MHz; 50 dB @ 30 MHz
EMI/RFI Filter, Common Mode (50-ohm load):
18 dB @ 300 kHz; 30 dB @ 1 MHz;
50 dB @ 5 MHz; 50 dB @ 20 MHz
Maximum Applied Surge Pulse Joule Rating:
Unlimited, due to current limiting (8 x 20 µs)
Maximum Applied Surge Pulse Voltage:
6000 volts (1.2 x 50 µs pulse),
industry standard rating
Maximum Applied Surge Pulse Current:
Unlimited, due to current limiting (8 x 20 µs)*
Endurance: IEEE C62.41-1991 Category B3 (C1)
Pulses: 1 kv>500,000; 3 kv>10,000; 6 kv>1000
Overvoltage Shutdown: 145 volts (resume at 135 volts)
Dimensions: 1.75" H x 5.31" W x 9.06" D
Weight: 3.4 lbs
Temperature Range: 5º to 35º C
Humidity Range: 5% to 95% R.H., non-condensing
Agency Listings: ETL and cETL (UL 1449, 2nd edition;
CSA C22.2 No.8-M1986, R2000)
*1.2 x 50 µs pulse, industry standard combination wave surge,
as per IEEE C62.41
Specifications subject to change without notice.
SurgeX is a division of Electronic Systems Protection, Inc.
This product, including its components and/or processes carried out thereby, are covered by one or more of the following: U.S. Pat. No. 4,870,534. 4,870,528. 6,728,089. 6,744,613. 7,068,487. Can. Pat. No. 1,333,191. 1,332,439. Other Patents Pending.