|
|  | |
 | Part Number: ILD500 | Description | Specifications | Accessories | Reviews |
| Professional Loop Driver (6.4 Amps)
The ILD500 is a professional audio hearing loop driver capable of driving loop areas in excess of 7530 sqft. (700 m²) with an unsurpassed clarity of sound for both music and speech for superior intelligibility. Based on proven and highly reliable technology it is backed by a 5 year warranty and Listen technical support. Improved power output provides outstanding value without compromise. It boasts all the usual features such as metal loss correction and is compatible with our unique Ultra-low Spill™ technology. The ILD500 is a compact and elegant unit suitable for freestanding, wall mounting or rack mounting.
Key Features
- The ILD500 delivers years of trouble free service to ensure venues will never disappoint people with t-coil equipped hearing aids
- Ideal for assistive listening applications in places of worship, theaters, schools, conference rooms, training facilities and hotels
- Continuous delivery of up to 6.4 amps under varying load conditions ensures the driver will operate under a variety of installation conditions
- Optimized sound quality and audio processing ensures that people with t-coil equipped hearing aids or receivers will be delighted with the experience
- Design, installation training, support and certification ensures the loop system meets the demands of customers
- Extensive audio and loop options delivers the right solution in a variety of applications
Includes
- One (1) ILD500 Professional Loop Driver (6.4 Amps)
- One (1) Rack Mount Bracket
- One (1) "T" Logo Installed Adhesive Sign – Large (11.7? x 8.3?)
- One (1) Line Cord (North America)
- One (1) Neutrik NL4 Speakon Connector
- One (1) Handbook and Installation Instruction
| Audio |
|---|
| Frequency Response | 80 Hz to 6.5 kHz ± 3 dB |
| Distortion | THD+N < 0.2 %, 1 kHz Sine Wave at Full Current |
| AGC | Optimized for Speech, Dynamic Range > 36 dB |
| Controls |
|---|
| Gain Control | Front recessed input level control |
| Metal Loss Correction | Correct system frequency response due to metal structures |
| Cooling | Forced Ventilation, Air Intake on Left Panel, Air Ejection at Rear |
| Indicators |
|---|
| Drive Current Indication | 6-LED Display Front Panel, 2 dB Increments |
| Fault Monitoring | LED Fault Indicators, Overload, Overhead, Loop Error |
| Remote Fault Monitoring | Relay Contacts |
| Interconnections |
|---|
| Loop Connector/s | Neutrik NL4 Speakon |
| Ancillary | ± 15 VDC, 0.15 A, Power Outlet to Power Accessories |
| Loop |
|---|
| Perimeter Loop - Coverage | 1:1 Aspect Ratio - 4,520 sgft. (420 m²), 2:1 Aspect Ratio - 5,650 sgft. (525 m²), 3:1 Aspect Ratio - 7,530 sgft. (700 m²)Condition 1 - Loop must be 3-6 ft. (1-2 m) above or below the receiver height, Condition 2 - There should be no metal structures in the plane of the loop, Condition 3 - There must be sufficient voltage to drive the loop |
| Power |
|---|
| Power | 120 VAC, 85W, 45-65 Hz, Power Switch/Led on Front Panel |
| Drive Current | 6.4 A (RMS), 9.0 A (Peak) with 1 kHz Sine Wave |
| Drive Current Peaks | Short Term > 13 A |
| Physical |
|---|
| Width | 16.9 in. (430 mm) |
| Height | 1.7 in. (44 mm) |
| Depth | 8.7 in. (220 mm) |
| Shipping Weight | 9.5 lbs. (4.3 kg) |
| Mounting | Freestanding |
| Cable Length | 10 AWG - Max distance at full current - 392 ft. (119 m), 14 AWG - Max distance at full current - 363 ft. (111 m), 18 AWG - Max distance at full current - 247 ft. (75 m), 22 AWG - Max distance at full current - 137 ft. (42 m), FB1.8 - Max distance at full current - 482 ft. (147 m) |
| Weight | 8.4 lbs. (3.75 kg) |
| Environmental |
|---|
| Relative Humidity | IP20 Protection, 20 to 90% Relative Humidity, 32 F (0 C) to 95 F (35 C) |
|
|---|
|
|
Audio Equipment;)
