Cables To Go 3m MTP® Compatible MPO to 4 Duplex Fiber Breakout Cable OM3 riser rated (OFNR) - 31327

Breakout 8-fibers from an MPO trunk connector to 4 LC Duplex connectors

This riser rated OM3 laser-optimized multimode (LOMMF) MPO fiber cable is ready for deployment in any multimode 50/125 MTP/MPO network. OM3 is fully backward-compatible with existing OM2 or OM1 systems. This multimode, MPO fiber cable is comprised of 8 fibers or 4 duplex channels within each connector (the center 4 fibers are not used). These high density cables are perfect when you have limited space, making it possible to run a single cable that automatically terminates 8 fibers in one easy plug-in. The fan-out side has 8 LC connectors that are numbered according to the fiber position in the MPO Connector and duplexed together. The push-pull release mechanism for the MPO connector is easy to engage and disengage, its latch design also prevents the plug from snagging when jumper cables are being routed.

• Labeled duplex LC connectors correspond with the fiber pinout on the MPO connector (No guide pins)
• Riser rated (OFNR) Jacket
• 3mm diameter at the MPO side to 2mm on the breakout side
• MPO fans out to 8 Fibers with LC connectors