Cables To Go HDMI and VGA + Stereo Audio HDBaseT over Cat5 Extender Wall Plate Transmitter - White - 29301

The HDMI and VGA + Stereo Audio to HDMI HDBaseT over Cat5 Extender Wall Plate Transmitter is an ideal solution for extending audio / video signals from a Blu-ray player and a laptop to a projector. This transmitter extends HDMI, VGA, and Stereo Audio signals over a single Cat5 / Cat5e / Cat6 unshielded twisted pair network patch cable up to 230 feet at a 1080p resolution. The rear cable connections for the Cat5 cable and the optional serial cable are set at 90 degrees, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power providing the flexibility to power at either the transmitter or receiver end. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

Note: Stranded Cat5e / 6 patch cables may be used for HDMI extension applications up to 230 ft. Shielded, solid conductor Cat5e / 6 cable must be coiled, is run near other high-frequency signaling cables, or in high EMI / RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable.

• Perfect for extending audio / video signals from a Blu-ray player and a laptop to a projector
• Three methods for input switching: Auto, Manual, and Serial RS232
• TruChoice power allows for power at the transmitter or receiver end
• Compatible with any HDBaseT receiver by Cables To Go
• Designed for easy connections in a wall box